PrintingWorkCentre 5300 Series Multifunction PrinterSystem Administrator Guide78Print Service SettingsConfiguring Print Service SettingsTo allocate memory for print settings:1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch System Settings > Print Service Settings > Allocate Memory.3. Specify the amount of memory allocated to the following print settings as necessary.• HP-GL/2 Auto Layout Memory• Job Ticket Memory• Receiving Buffer USB, LPD, Netware, SMB, IPP, Port 9100To set memory for other types of print settings:1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch System Settings > Print Service Settings > Other Settings.• Print Area: Touch Extended to print beyond the standard page margins.• Substitute Tray: Specify what happens when the printer runs out of a specific size paper:• Display Message• User Larger Size• User Closest Size• Select Tray 5• Paper Type Mismatch: Specify what happens when the paper type loaded in the tray doesnot match the paper type specified.• Print• Display Confirmation Screen• Display Paper Supply Screen• Unregistered Forms: Set whether or not to print a job if a form specified for printing in a formdata file (overlay printing) is not registered on the printer. If you touch Print, only the data isprinted because the specified form is not present. The setting is added to the print settingsmenu when there is a print specification from the host computer.• Resume Job After Print Error: Touch Job Resumes Automatically to automatically cancel aprint job when an error occurs. Touch Resume by User to display a control panel promptrequiring a user to cancel the job manually.• When Paper Jam Occurs: Touch Resume Job after Jam Clearance to continue printing a jobafter clearing a paper jam, or Delete Job to cancel the print job.• Printer User ID: You can print a user’s User ID on the page. Touch Top Left, Top Right,Bottom Left, or Bottom Right. The User ID must be specified in the user’s print driver.• Banner Sheet: Touch Start Sheet to print an identifying page before each print job, EndSheet to print an identifying page after each print job, or Start Sheet and End Sheet toprint both.• Banner Sheet Offset: Set whether or not to offset when banner sheets are output.• Banner Sheet Tray: Select the tray to use for printing banner sheets.
