ScanningWorkCentre 5300 Series Multifunction PrinterSystem Administrator Guide94Configuring General Scan Service SettingsSetting Scan DefaultsTo define scanning default settings for all users:1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch System Settings > Scan Service Settings > Scan Defaults.3. Touch a default setting in the list, then touch Change Settings.4. Make the desired changes to the default setting, then touch Save. For details about scan settings,see the User Guide at www.xerox.com/office/WC53XXdocs.Setting Scan to PC DefaultsTo define default Scan to PC settings for all users:1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch System Settings > Scan Service Settings > Scan to PC Defaults.3. Touch a default setting in the list, then touch Change Settings.4. Change the following settings as necessary:• Transfer Protocol: Touch FTP, SMB, or SMB (UNC Format).• Login Credential to Access Destination: Touch Remotely Authenticated User to use theuser name and password of the remotely authenticated user for login.• User Name for FTP Scan: If you selected Remotely Authenticated User for the LoginCredential to Access Destination setting, touch User Name Only, to only use the User Namefor login, or Add Domain Name to use the user’s full login credential name, including thedomain name.
