Initial SetupXerox ® WorkCentre® 7800/7800i Series Color Multifunction Printer 21System Administrator GuideAccessing Administration and ConfigurationSettingsYou can access the administration and configuration settings from the Tools tab on the control panel orfrom the Properties tab in Xerox ® CentreWare ® Internet Services. The control panel consists of a touchscreen and buttons you press to control the functions available on the printer. Xerox ® CentreWare ®Internet Services is the administration and configuration software installed on the embedded Webserver in the printer. It allows you to configure and administer the printer from a Web browser.The administrator password is required when accessing locked settings in Xerox ® CentreWare ® InternetServices or at the control panel. Most printer models have a default configuration that restricts access tosome settings. Access is restricted for settings on the Properties tab in Xerox ® CentreWare ® InternetServices, and settings on the Tools tab on the control panel touch screen.Accessing the Control Panel as a System Administrator1. At the printer control panel, press the Log In/Out button.2. Type admin and touch Next.3. Type the administrator password, then touch Done.Note: The default password is 1111.Accessing Xerox® CentreWare® Internet Services as a System AdministratorBefore you begin:• Locate your printer IP address using the Configuration Report. For details, see Printing theConfiguration Report on page 24.• Ensure that TCP/IP and HTTP are enabled. If you disabled either of these protocols, enable them atthe control panel before accessing Xerox ® CentreWare ® Internet Services.To log in to Xerox ® CentreWare ® Internet Services as the administrator:1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.2. In the top right area of the page, click Login.3. Under User ID, type admin.4. Under password, type the administrator password. The default password is 1111.5. Click Login.
