1 Outline1-81.5 Examples of Servo System ConfigurationsThis section describes examples of basic servo system configuration.∗ Use a 24-VDC power supply. (Not included.)R TRelay cable fordigital operatorNon-isolatedAC/DC converterfor control power supplyNon-isolatedAC/DC converterfor main circuit powersupplyPower supplycableGroundingwire forpowersupplySGMMV ServomotorSGDV-ES1ASERVOPACKorSGDV-EP1ASERVOPACKConnectioncable foranalogmonitor unitAnalogmonitorunitCable foranalogmonitor100/200 VACREFALARMSVONSERVOREAD WRITESERVOYASKAWADIGITAL OPERATORREFALARMSVONSERVOREAD WRITESERVOYASKAWADIGITAL OPERATORPower supplySingle-phase 100/200 VACNoise filterMolded-casecircuit breaker(MCCB)Protects the powerline by shutting thecircuit OFF whenovercurrent isdetected.Eliminatesexternal noise fromthe power line.MagneticcontactorTurns the servoON and OFF.Install a surgeabsorber.Brake power supply∗Used for a servomotorwith a brake.Encoder cableConnection cablefor personalcomputerDigitaloperatorDigitaloperatorPersonalcomputerHost controllerI/O signal cableBattery case(when an absoluteencoder is used.)Servomotormain circuitcableMagnetic contactorTurns the brake power supplyON and OFF.Install a surge absorber.Analog
