YASKAWA SI-EP3/V Technical Manual

Also see for SI-EP3/V: Installation manual

Contents

5 Installation Procedure17 YASKAWA SIEP YEACOM 06 V1000 Option PROFINET SI-EP3/V Technical Manual8. On NEMA Type 1 enclosure drives, the screw for the drive ground terminal also acts as one of the screws thatattaches the NEMA Type 1 conduit bracket to the drive. Reattach the NEMA Type 1 conduit bracket according toFigure 11 and connect the drive-side of the ground wire to the drive ground terminal.Note: The four different ground wires packaged with the option connect the option to different drive models. Select the proper groundwire depending on drive size.Figure 11Figure 11 Reattach the NEMA Type 1 Conduit Bracket and Connect the Ground Wire9. Reattach the bottom cover. Keep the ground wire inside of the bottom cover when reattaching.Figure 12Figure 12 Reattach the Bottom Cover10. On models CIMR-VBA0006 to BA0018, 2A0010 to 2A0069, and 4A0001 to 4A0038, reattach theterminal cover.Refer to Figure 14 for drive models CIMR-V¨BA0006 to BA0018, 2A0010 to 2A0020, and 4A0001 to4A0011, which require routing the ground wire through the provided notch when reinstalling the terminal cover.Ground terminalGround wireDrive ground terminal/NEMA Type 1 conduitbracket screwGround wireDrive-sideconnectorScrew size:M3.5 to M6Option unitconnectorScrew size: M3IP20/Open-Chassis IP20/NEMA Type 1 Enclosure