YASKAWA SI-EP3/V Technical Manual

Also see for SI-EP3/V: Installation manual

Contents

9 YASKAWA SIEP YEACOM 06 V1000 Option PROFINET SI-EP3/V Technical Manual3 Receiving3 ReceivingPlease perform the following tasks after receiving the option.• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.• Verify receipt of the correct model by checking the model number printed on the option nameplate (Refer to Top Viewsof Option on page 10 for nameplate positioning).• Contact your supplier if you have received the wrong model or the option does not function properly. Option Package Contents Tools Required for InstallationA Phillips screwdriver (M3 metric/#1, #2 U.S. standard size*) is required to install the option and remove drive frontcovers.*Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.Note: Tools required to prepare the option cables for wiring are not listed in this manual.Description: Option Unit Ground Wire Installation Manual_Quantity: 1 4 1MANUAL