u F6 and F7: Serial Communications Option Card Settingsn F6-01: Communications Error Option SelectionParameter OverviewNo. Name Description Range DefaultF6-01 Communications Error Operation SelectionSelects the operation after a communications error occurred.0: Ramp to stop using current accel/decel time1: Coast to stop2: Fast Stop using C1-093: Alarm only0 to 3 1n F6-02: External Fault from Comm. Option SelectionParameter OverviewNo. Name Description Range DefaultF6-02 External Fault from Comm. Option Selection Sets when an external fault from a comm option is detected.0: Always detected1: Detection during Run only 0 or 1 0n F6-03: External Fault from Comm. Option Operation SelectionParameter OverviewNo. Name Description Range DefaultF6-03 External Fault from Comm. Option Operation SelectionSelects the operation after an external fault set by a communications option(EF0).0: Ramp to stop using current accel/decel time1: Coast to stop2: Fast Stop using C1-093: Alarm only0 to 3 1n F6-04: Trace Sampling RateParameter OverviewNo. Name Description Range DefaultF6-04 Trace Sampling Rate - 0.0 to 5.0 2.0 sn F6-10: CC-Link Node AddressParameter OverviewNo. Name Description Range DefaultF6-10 CC-Link Node Address Sets the node address if a CC-Link option card is installed 0 to 63 0n F6-11: CC-Link Communication SpeedParameter OverviewNo. Name Description Range DefaultF6-11 CC-Link Communication Speed0: 156 Kbps1: 625 Kbps2: 2.5 Mbps3: 5 Mbps4: 10 Mbps0 to 4 0n F6-14: BUS Error Auto ResetParameter OverviewNo. Name Description Range DefaultF6-14 BUS Error Auto Reset Selects if a BUS fault can be automatically reset. 0 or 1 0n F6-20: DeviceNet MAC AddressParameter OverviewNo. Name Description Range DefaultF6-20 DeviceNet MAC Address Selects the drives MAC address for DeviceNet 0 to 63 0n F6-21: DeviceNet Communication SpeedParameter OverviewNo. Name Description Range DefaultF6-21 DeviceNet Communication Speed0: 125 kbps1: 250 kbps2: 500 kbps3: Detect automatically0 to 3 35.6 F: Option Settings156 YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
