FromFlowchartASet or verify the V/f pattern settings E1-oo.Energy Savings(b8-01=1)orSpeed EstimationSpeed Search (b3-24=1)enabled ?Is the motor cablelonger than 50 m? Perform Rotational Auto-Tuningfor V/f Control(T1-01 = 3)NO YESPerform Stationary Auto-Tuning forterminal resistance (T1-01 = 2)YESNOReturn toFlowchartAFigure 4.7 Simple Motor Set-Up with Energy Savings or Speed Search Using V/f Modeu Subchart A2: High Performance Operation Using Open Loop Vector Motor ControlFigure 4.8 , Flowchart A2, uses Open Loop Vector Control for high-performance motor operation. This is appropriate for applications requiring highstarting torque, torque limits, and improved speed regulation.FromFlowchartAPossible for motor torotate during tuning? *Perform Rotating Auto-Tuning (T1-01 = 0)Is the motor cablelonger than 50 m?Perform Stationary Auto-Tuning forterminal resistance (T1-01 = 2)*Rotational tuning shouldbe performed with theload disconnectedNO YESNOMotor test report/ datasheet available?Enter the data from the motor datasheet to E2-oo parameters.NOCalculate necessary E2-ooparameter data using thenameplate information.YESYESReturn toFlowchartAFigure 4.8 Flowchart A2: High Performance Operation Using Open Loop Vector Motor Controlu Subchart A3: Operation with Permanent Magnet MotorsFigure 4.9 , Flowchart A3, illustrates tuning for PM motors in Open Loop Vector Control. PM motors can be used for energy savings in reduced orvariable torque applications.4.4 Start-up Flowcharts68 YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
