4.2 Using the Digital LED OperatorUse the LED operator to enter run and stop commands, display data, edit parameters, as well as display fault and alarm information.u Keys, Displays, and LEDsSTOP(Hz)(Hz)(A)(V)::::::::::FrefFWD/REV SelFoutloutMon1MonitorVerifySetUpGuideProgramAuto-TuningRead manual before installing.Risk of electric shock.Wait 1 minute for capacitor discharge afterdisconnecting power suppl y.To conform to requirements, make sure toground the supply neutral for 400V class.WARNINGSTOP951234 6 7 810V10001112 131514Table 4.1 Keys and Displays on the LED OperatorNo. Display Name Function1 Data Display Area Displays the frequency reference, parameter number, etc.2 ESC Key Returns to the previous menu.3 RESET Key Moves the cursor to the right.Resets the drive to clear a fault situation.4 RUN RUN Key Starts the drive.5 Up Arrow Key Scrolls up to select parameter numbers, setting values, etc.6 Down Arrow Key Scrolls down to select parameter numbers, setting values, etc.7 STOP STOP KeyStops the drive.Note: Stop priority circuit. A fast-stop is available by pressing the STOP key when the drive detects a dangereven if the drive is running by a signal from the multi-function contact input terminal (REMOTE is set). Toavoid stoppage by using the STOP key, set o2-02 (STOP Key Function Selection) to 0 (Disabled).8 ENTER Key Selects all modes, parameters, settings, etc.Selects a menu item to move from one display screen to the next.9 LO/RE Selection KeySwitches drive control between the operator (LOCAL) and the control circuit terminals (REMOTE).Note: LOCAL/REMOTE key effective during stop in drive mode. If the digital operator could change fromREMOTE to LOCAL by incorrect operation, set o2-01 (LOCAL/REMOTE Key Function Selection) to“0” (disabled) to disable LOCAL/REMOTE key.10 RUN Light Lit while the drive is operating the motor.11 LO/RE Light Lit while the operator (LOCAL) is selected to run the drive.4.2 Using the Digital LED Operator58 YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
