EIGNITION SYSTEMELEC8-8SPARK PLUG CAP (WITH RESISTER)1. Inspect:9Spark plug capLoose Æ Tighten.Cracks/damage Æ Replace.2. Remove:9Spark plug cap3. Measure:9Spark plug cap resistanceOut of specification Æ Replace.Replacement steps:(resister type)8 To remove the spark plug cap turn itcounter clockwise.8 To install the spark plug cap turn itclockwise until it is tight.Spark plug cap resistance:With resister type4.0 ~ 6.0 kΩMeasuring steps:8 Connect the pocket tester (kΩx1) tothe ignitor ass’y lead.Secondary:Tester (+) lead Æ White leadTester (-) lead Æ High-tension cordIgnitor ass’y coil resistance:Secondary coil: 11.6 ~ 17.4 kΩB WSPARK PLUGRefer to "GENERAL" in chapter 3.