POWER UNITINSPADJ E3-6ab21Engine oil replacement1. Remove:9Oil level plug9Drain plug with washer 29Gasket 12. Install:9Gasket 19Drain plug with washer 23. Fill:9Engine oil(into the crankcase)Drain plug:20 Nm (2.0 m•kg, 14.4 ft•lb)Recommended engine oil:API: SE, SF, SE-SF, SE-SF-CCor SG-CDSAE: 10W-30 or 10W-40Total quantity:500 cm 3(16.9 US oz, 17.6 Imp oz)4. Install:9Oil level plug5. Check:9Engine oil levelRefer to “Engine oil level“.2. Check:9Engine oil levelBetween a and b Æ Proper quantity.Above a Æ Check for over filling orfor water in the engine oil.Below b Æ Add engine oil up to levela and check for oil leakage.NOTE:9Run the engine for several minutes, turnit off, and check the engine oil levelagain.9If the engine oils still not with in the prop-er level, add/drain as needed.