Yamaha r-n602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

17 EnConnecting to networkPREPARATION EnglishYou can easily setup a wireless connection by applying theconnection settings on iOS devices (iPhone/iPod touch).Before proceeding, confirm that your iOS device isconnected to a wireless router (access point).1 Press A to turn on this unit.2 Press SETUP.3 Use the cursor keys (B / C) to select“Network” and press ENTER.yTo return to the previous state, press RETURN.4 Use the cursor keys (B / C) to select“Connection” and press ENTER.5 Use the cursor keys (B / C) to select“Wireless” and press ENTER.6 Use the cursor keys (B / C) to select “ShareSetting” and press ENTER.7 Use the cursor keys (B / C) to select thedesired connection method and pressENTER.The following connection methods are available.When you select “Wireless (WAC)” as the connection method, allnetwork settings are initialized.■ Sharing the iOS device setting wirelesslyIf you select “Wireless (WAC)” as the connection method,perform the network setting sharing operation on your iOSdevice. (The following procedure is a setup example foriOS 8.)1 On the iOS device, select the unit as theAirPlay speaker in the Wi-Fi screen.2 Check the network currently selected and tap“Next”.Sharing the iOS device settingIf the network connection is not set, when you turn onthis unit, “WAC” (Wireless Accessory Configuration)appears on the front display, and search automaticallyiOS device. You can automatically share the networksettings.If the unit is already wire connected and alsoconnected to a wireless network by another method,settings will not be shared automatically. To manuallyshare the iOS device network settings, perform thefollowing operation.R-N602 XXXXXXWACPRESETMEMORYSETUPHOMEMUTENOW PLAYINGVOLUMERETURNENTEROPTIONRETURNSETUPENTERCursor keys B / CWPSWIRELESSWireless(WAC)You can apply the connection settings on the iOSdevice to the unit using a wireless connection. Fordetails, see “Sharing the iOS device settingwirelessly”. (You need iOS device with iOS 7 orlater.)USBCableYou can apply the connection settings on the iOSdevice to the unit using a USB cable. For details, see“Sharing the iOS device setting using a USB cable”.(You need iOS device with iOS 5 or later.)NoteWireless(WAC)SHAREThe name of this unitTap here to start setupThe network currentlyselected