Yamaha r-n602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

22 EnBASIC OPERATION1 Press A (power) to turn on this unit.2 Rotate the INPUT selector on the front panel(or press one of the input selection keys onthe remote control) to select the input sourceyou want to listen to.3 Press SPEAKERS A and/or SPEAKERS B onthe front panel or on the remote control toselect speakers A and/or speakers B.When speaker set A or speaker set B are turned on,“A” or “B” is displayed on the front displayaccordingly (p. 7).• When one set of speakers is connected using bi-wire connections,or when using two sets of speakers simultaneously (A and B),make sure “A” and “B” are displayed on the front display.• When listening with headphones, turn off the speakers.4 Play the source.5 Rotate the VOLUME control on the frontpanel (or press VOLUME +/– on the remotecontrol) to adjust the sound output level.yYou can adjust the tonal quality by using the BASS, TREBLE,BALANCE and LOUDNESS controls or the PURE DIRECTswitch on the front panel.6 When you finish using, press A (Power) onthe front panel to turn off the power.When you press A (Power) on the remote control,this unit set to standby mode.■ Enjoying pure high fidelity sound(Pure Direct)When the PURE DIRECT switch is turned on, routesinput signals from your audio sources so that the inputsignals bypass the BASS, TREBLE, BALANCE andLOUDNESS controls, thus eliminating any alterations tothe audio signals and creating the purest possible sound.The PURE DIRECT indicator lights up and the frontdisplay turns off after a few seconds.• When the PURE DIRECT switch is turned on, the front displayturns off.• The BASS, TREBLE, BALANCE, and LOUDNESS controls donot function while the PURE DIRECT switch is turned on.PlaybackPlaying a sourceNotesVOLUMEPURE DIRECTRETURNCONNECTPUSH - ENTERTUNINGPRESETBANDMEMORY CLEARBASSINPUT5V 1ABALANCEL RTREBLE LOUDNESSFLAT-30dBDIMMER MODEDISPLAYSELECTPHONES SPEAKERSA BA (power)SPEAKERS A/BINPUT selectorVOLUME controlLINE 1OPT 1 OPT 2 CDCOAX 1 COAX 2 BLUETOOTHNET USBLINE 2 LINE 3TUNERTUNINGBANDSLEEPPHONOBASPEAKERSSETUPHOMEMUTENOW PLAYINGVOLUMERETURNOPTIONInput selectionkeysA (power)VOLUMESPEAKERS A/BNotesVOLUMEPURE DIRECTRETURNCONNECTPUSH - ENTERTUNINGPRESETBANDMEMORY CLEARBASSINPUT5V 1ABALANCEL RTREBLE LOUDNESSFLAT-30dBDIMMER MODEDISPLAYSELECTPHONES SPEAKERSA BPURE DIRECT switch