Yamaha r-n602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

48 EnConfiguring various functions (Setup menu)Sets the maximum volume to prevent excessive loudness.Setting range-30 dB to +15.0 dB / +16.5 dB (5 dB step)Default+16.5 dBSets the initial volume when the receiver is turned on.Setting rangeOff, Mute, -80.0 dB to +16.5 dB (0.5 dB Step)DefaultOffEnables/disables the auto-standby function. If you do notoperate the unit for the specified time, the unit willautomatically go into standby mode.yJust before the unit enters standby mode, “AutoPowerStdby”appears and then countdown starts in the front display.Enables/disables the eco (power saving) mode. When theeco mode is enabled, you can reduce the unit’s powerconsumption.The new setting will take effect after the unit is restarted.Be sure to press ENTER to restart the unit after selecting asetting.When “ECO Mode” is set to “On”, the front display may becomedark.Max VolumeInitial VolumeAutoPowerStdby(Auto Power Standby)Off(Default)Does not set the unit to standby modeautomatically.OnSets the unit to standby mode automatically.While NET, BLUETOOTH or USB is selected asthe input source, the unit will switch to standbymode if the selected source is not played back for20 minutes.For all input sources, the unit will switch tostandby mode if it is not operated for 8 hours.ECO ModeOff (default) Disables the eco mode.On Enables the eco mode.Note