Yamaha r-n602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

29 EnBASICOPERATION EnglishYou can play back music files stored on a Bluetoothdevice (such as mobile device) on the unit.Please also refer to the owner’s manual of your Bluetoothdevice.• To use the Bluetooth function, set “Bluetooth” (p. 47) in the“Setup” menu to “On”.• A Bluetooth device may not be detected by the unit or somefeature may not be compatible, depending on the model.yYou can transmit audio to Bluetooth speakers or headphonesusing the MusicCast CONTROLLER app. To transmit audio, set“Audio Send” (p. 47) in the “Setup” menu to “On”. The audiooutput can only be selected from the MusicCast CONTROLLERapp.When connecting a Bluetooth device to the unit for thefirst time, the pairing operation is required to perform.Pairing is an operation that registers the Bluetooth deviceswith each other beforehand. Once pairing has beencompleted, subsequent reconnection will be easy evenafter the Bluetooth connection is disconnected.1 Press BLUETOOTH to select “Bluetooth” asthe input source.If another Bluetooth device is already connected,disconnect the Bluetooth connection before youperform a pairing operation.2 Turn on the Bluetooth function of theBluetooth device.3 On the Bluetooth device, select the unit’smodel name from the available device list.After pairing has been completed and the unit isconnected to the Bluetooth device, “Connected”appears on the front display, and Bluetooth indicatorwill be light up.y• If the pass key is required, enter the number “0000”.• Complete a pairing procedure within 5 minutes.• If no Bluetooth devices are found, “Not found” appears.Connect a paired Bluetooth device and start playback.Check the following beforehand:• Pairing has been completed.• Bluetooth function on the Bluetooth device is turned on.1 Press BLUETOOTH to select “Bluetooth” asthe input source.yIf the unit detects the Bluetooth device previously connected, theunit automatically connects to the Bluetooth device after Step 1.To establish another Bluetooth connection, first disconnect thecurrent Bluetooth connection.Playing back music via BluetoothNotesConnecting a Bluetooth device(pairing)This unit Bluetooth device(such as mobile device)OPT 1 OPT 2 CDCOAX 1 COAX 2 BLUETOOTHSLEEPPHONOBASPEAKERSBLUETOOTHPlaying back Bluetooth devicecontentsConnectedBLUETOOTH A VOL.OPT 1 OPT 2 CDCOAX 1 COAX 2 BLUETOOTHSLEEPPHONOBASPEAKERSREPEAT SHUFFLEPlayback keysBLUETOOTH