Yamaha r-n602 Owner's Manual

Also see for R-N602: Owner's manual Owner's manual Owner's manual Firmware update procedure Service manual

Contents

53 EnTroubleshootingEnglishADDITIONALINFORMATIONOnly the speaker onone side can beheard.Incorrect cable connections. Connect the cables properly. If the problem persists,the cables may be defective. 11Incorrect setting for the speaker balance. Set the BALANCE control to the appropriateposition. 23There is a lack of bassand no ambience.The + and – wires are connected inreverse at the amplifier or the speakers.Connect the speaker wires to the correct + and –phase. 12A “humming” soundcan be heard.Incorrect cable connections. Connect the audio plugs firmly. If the problempersists, the cables may be defective. 11No connection from the turntable to theGND terminal.Make the GND connection between the turntable andthis unit. 11The volume level islow while playing arecord.The record is being played on a turntablewith an MC cartridge.The turntable should be connected to this unit throughthe MC head amplifier. —The sound isdegraded whenlistening with theheadphonesconnected to the CDplayer or the tapedeck connected tothis unit.The power of this unit is turned off, or thisunit is set to standby mode.Turn on the power of this unit.—The sound level islow.The loudness control function isoperating.Turn down the volume, set the LOUDNESS controlto the FLAT position, and then adjust the volumeagain.23Problem Cause Remedy Seepage