Zanussi ZCG 8021 Owner's Manual

The electronic timerPlease note that this is a 24 hour clock, for example 2.00 pm is shownas 1400.In the following pages we explainhow to set the controls. Read throughthem a few times until you are familiarwith the procedure.If the oven is switched off on the wall, or there is a loss of power, theclock will stop and you will not be able to use the main oven. When youfirst switch the electricity supply on, the timer display will flash.To set the time of dayTurn the selector knob to 'Manual' thenturn to 'Clock'.Set the correct time by turning andholding the setting knob clockwise.Adjust the time by turning the settingknob in either direction.Turn the selector knob back to 'Manual'.To use the TimerTurn the selector knob to 'Timer'. Turnthe setting knob clockwise until thedisplay shows the time you want. Thebell symbol ( ) will be showing andthis will stay lit up during the time. Ourdiagram shows the timer set to 5minutes.If you change your mind and want to cancel the time you have set,simply turn the setting knob anticlockwise. Then turn the selector to'Manual'.Z C G 8 0 2 121Cookpot symbolSetting knobBell symbolSelectorThe electronic timer