Zanussi ZCG 8021 Owner's Manual
                                                    | |
Contents
|
12. CHECKING THE SECOND OVEN1. Turn the second oven thermostat control knob anticlockwise to Mk8 and press the ignition button. Assoon as the burner is alight the button can be released.2. When the oven burner lights up there should be a low gas rate at first to the oven burner which is theF.S.D. by-pass rate.3. When the F.S.D. phial has heated up it opens the F.S.D. valve and the main gas stream flows to theburner.4. After 1 minute check that the flame covers the full width of the burner and is stable.5. Set the oven control to Mk. 2, close the oven door and check that after approx. 10 minutes the flamesize has reduced.6. Turn off the control knob and check that the oven flames go out.13. CHECKING THE MAIN OVEN LIGHTTurn the main oven thermostat knob full on and check that the main oven light is operative. Turn off thethermostat.GENERAL NOTEInstruct the user on how to use the appliance and its ignition system. Refer the user to the wording in theinside cover which gives advice on the safe operation of the appliance.49 |
Related manuals for Zanussi ZCG 8021
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine