Paradyne COMSPHERE 3600 Series manuals
COMSPHERE 3600 Series
Table of contents
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- related documents
- Overview
- Features
- Central Office (CO) Power Unit with One Power Module
- Technical Specifications
- Equipment Warranty and Support
- Installation Considerations
- Maximum Ambient Temperatures Permitted
- CO Power Unit Installation
- Installing the Optional Second Power Module
- Option Straps (S1 through S5) on the CO Power Unit's Backplane
- Settings for Independent Mode
- COMSPHERE 3000 Series Carrier (Rear)
- Using One Power Source and One Input Power Cable for Basic (shown) or Redundant Mode
- Using Two Separate Power Sources for Independent Mode or Redundant Mode
- Using One Power Source and Two Input Power Cables for Independent Mode or Redundant Mode
- Installing the SDCP
- Jumper Settings
- Air Filter and Brackets Installation (Optional)
- Air Filter Brackets Installation
- Power Module Replacement Instructions
- troubleshooting
- Replacing a Power Module
- preventive maintenance
- A-1. CO Power Unit (Rear)
- A-2. Connector Housing and Contact
- A-3 Pin Assignments for the CO Alarm System Outputs
- A-3. NMS Adapter Cable (Feature Number 3000-F2-510)
COMSPHERE 3600 Series
Table of contents
- important safety instructions
- government requirements
- equipment warranty and support
- Table of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Async Terminal Operation
- Standard DSU Features
- Optional DSU Features
- DBM Common Capabilities
- TDM/MCMP and Digital Bridge Capabilities
- Related Documents
- Overview
- Installation Process
- Powering Up the DSU
- Saving and Changing Configuration Options
- Home Screen Display
- DDS Network Connection
- DTE Connections
- SNA Diagnostic Interface Verification
- Front Panel Operation 3
- Table Of Contents
- Front Panels
- Keypad
- Status Indicators
- Menu Structure
- Status Branch
- DTE Status
- Backup Branch
- Device Test
- remote digital loopback
- Digital Test
- Bit Error Rate Test
- Configuration Branch
- Poll List
- SPID
- Reset
- Front Panel Security
- Configuration Option Tables Format
- Data Service Unit Menu
- DSU Configuration Worksheet
- dsu configuration worksheet
- Async Terminal Operation C
- Table Of Contents
- A2-GB46
- enabling the async terminal
- screen types
- changing external leads
- input screens
- display screens
- sna diagnostic interface
- troubleshooting
COMSPHERE 3600 Series
Table of contents
- document feedback
- important safety instructions
- Table of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- about this guide
- related documents
- Overview
- Standard Features
- Models
- Model 3610 DSU with TDM or MCMP
- Model 3611 DSU with TDM or MCMP
- DBM Types
- Hardware Straps
- Model 3610 TDM/Flex or MCMP/Flex Switch Locations
- Changing Hardware Settings
- Assembling/Disassembling the TDM or MCMP
- Changing TDM/Flex or MCMP/Flex Interface Compatibility
- Changing TDM/DSD or MCMP/DSD Interface Compatibility
- Electrical Connection
- Network Diagnostic Connection
- Network and LADS Connections
- Verification Testing
- Adding a TDM/Flex or MCMP/Flex to an Installed Model 3610 DSU
- Getting Started
- Removing the DSU from Its Base
- Reassembling the Unit
- Non-Modular TDM/MCMP Circuit Card Switch Locations
- Software Configuration
- Adding a TDM or MCMP to an Installed Model 3611 DSU
- Non-Modular TDM or MCMP Installation
- COMSPHERE 3000 Series Carrier (Rear)
- Modular TDM or MCMP Installation
- Removing TDM or MCMP from an Installed Model 3611 DSU
- Principles of Operation 4
- Table Of Contents
- Network Terminology
- Multipoint Transmission
- Modes Of Operation
- Time Division Multiplexing
- speed characteristics
- TDM Architecture and Signal Flow
- Single-Port Point-to-Point Circuit with Nondisruptive Diagnostics
- Multipoint Async-Compatible Network
- Point-to-Point Multiplexing
- TDM with Extended Circuit
- Digital Sharing
- Multiplexing and Digital Sharing
- FEP Port Sharing
- Case 1 – V.32 Backup for Subrate DDS
- Case 2 – V.32 Backup for High-Speed DSU
- Case 3 – V.32 Backup for DSU with Extended Circuits
- Case 4 – Switched 56 DBM Backup for DSU Operating at 56 kbps or Less
- Case 5 – Aggregate Switched Backup for TDM Circuits Configuration
- Multichannel Multipoint
- Applications Combined on One DDS Multipoint Circuit with MCMP
- management channel
- MCMP Architecture and Signal Flow
- MCMP with Independent Channels
- MCMP with Digital Sharing
- Case 1 – Dedicated MCMP Backup with Switched 56 DBMs
- Case 2 – Backing Up the Channels to the Most Important Tributary Location
- Case 3 – Backing Up One Complete Channel (Partial Backup)
- Case 3 – Backing Up One Complete Channel (Full Backup)
- Case 4 – Backing Up (Up to) Three Channels via the FEP Port-Sharing Feature
- Digital Bridge/DCE Interface
- Aggregate Switched Backup for MCMP Circuit Configuration
- Digital Bridge
- Maximum Bridging Capability – Up to 20 Bridging Ports
- Broadcasting Data Through the Digital Bridge
- diagnostic considerations
- Multipoint DDS Circuit in Partial Backup
- Tributary Addressing via DDS Connections
- Tributary Addressing via Backup Connections
- multipoint backup architecture
- Central-Site Bridging Architecture (9.6 kbps) – Partial Backup in Effect
- Central-Site Bridging Architecture (56 kbps) – Inactive Digital Bridge
- Central-Site Bridging Architecture (56 kbps) – Active Digital Bridge
- dbm-v/dbm-s/dbm-d dial on dtr capability
- automatic dds restoration
- LADS Connection Distances
- point-to-point lads
- Bridged LADS Operation
- Bridged LADS Architecture and Signal Flow
- NMS Control
- SNA Diagnostic Interface
- Sample Configuration and LPDA-2 Addressing
- Dial Backup with LPDA-2 Configuration
- Multipoint Dial Backup with LPDA-2
- Multiplexing with TDM (LPDA-2 Monitoring)
- Digital Sharing in a Point-to-Point Circuit
- Digital Sharing in a Multipoint Circuit
- Digital Sharing in a TDM Circuit (LPDA-2 Monitoring)
- Digital Sharing in an MCMP Circuit (LPDA-2 Monitoring)
- DSU Operations 5
- Table Of Contents
- Diagnostic Control Panels
- Status Indicators
- Model 3611 DSU and MCMP Faceplates
- TDM and MCMP Status Indicators (Model 3611 Only)
- DSU with TDM or MCMP and DBM-V/DBM-S/DBM-D Status Indicators
- Menu Structure
- Status Branch
- expanded health and status
- DTE Lead Status Codes
- Circuit Quality Measurements
- Backup Branch
- Backup Branch Menu Selections
- Test Branch
- Device Test
- Local Loopback
- DTE Loopback on Port 2
- Digital Loopback
- Remote Digital Loopback
- Bilateral Loopback
- Digital Test
- Digital Test Results
- End-to-End Test
- Bit Error Rate Test Results
- Bit Error Rate Tests in TDM or MCMP Mode
- Configuration Branch
- mux configuration options
- Choosing Mode of Operation and Setting Configuration Options
- Complete List of MUX Setup Configuration Options
- port option sets
- Complete List of MUX Port Configuration Options
- port speed configuration options
- Poll List Menu Options
- acquiring the poll list
- Directory Entry and Password Characters
- Control Branch
- transmitter control
- external leads
- data service unit menu
- C-1 TDM Interface Cable (Feature Number 3600-F2-500)
- C-2 Digital Bridge Interface Cable (Feature Number 3600-F2-501)
- C-3 Pin Locations on the 60-Position High-Density Connector of the Non-Modular Carrier-Mounted TDM/MCMP Circuit Card
- C-4 EIA-232-D/V.24 Connector (Port 1)
- C-5 V.35 Connector (Port 1)
- C-6 6-Port Connector Module (Part Number 870-1700-0011)
- C-7 6-Port V.35 Interconnect Cable (Feature Number 3600-F3-500)
- C-8 6-Port V.35 Interconnect Cable Connector
COMSPHERE 3600 Series
Table of contents
- document feedback
- important safety instructions
- government requirements
- Table of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- about this guide
- related documents
- reference documents
- Overview
- Feature Overview
- Optional Features
- Feature Description
- Single-Port Point-to-Point Circuit with Nondisruptive Diagnostics
- Valid Sync Speeds and Nondisruptive Diagnostics
- Single-Port Multipoint Circuit with Nondisruptive Diagnostics
- Multipoint Async-Compatible Network
- Diagnostic Compatibilities
- nms interface
- NMS Interfaces to the SDU
- nondisruptive diagnostics
- disruptive diagnostics
- Protocols and Addressing
- Conversion Table for DATAPHONE II Addresses
- Conversion Table for DMC Addresses
- dial backup considerations
- Sample Diagnostic Configuration
- Aggregate Switched Backup for a Point-to-Point Configuration
- Aggregate Switched Backup for a Multipoint Configuration
- External DTE Lead Control of Backup
- Technical Specifications
- General 3600 Series Technical Specifications
- DSU Technical Specifications
- V.32 DBM or DBM-V Technical Specifications
- Wire Switched 56 DBM or DBM-S Technical Specifications
- Wire Switched 56 DBM or DBM-D Technical Specifications
- TDM Technical Specifications
- MCMP Technical Specifications
- Technical Specifications for Digital Bridge Capability
- Equipment Warranty and Support
- Model 3610 Installation 2
- Installation Planning
- Hardware Straps
- Model 3610 DSU Installation
- Model 3610 Circuit Card Switch and Jumper Locations
- Electrical Connection
- Model 3610 DSU Electrical Connection
- Network Diagnostic Connection
- Async Terminal Connection
- DDS (or LADS) Network Connection
- DSU DTE Connection
- Replacing Firmware of an Installed Model 3610 DSU
- Non-Modular Model 3611 Circuit Card Switch and Jumper Locations
- Modular 3611 Circuit Card Switch and Jumper Locations
- Model 3611 DSU Installation
- COMSPHERE 3000 Series Carrier, Rear View
- installing a modular 3611 dsu
- Modular DSU V.35 Adapter Installation
- Software Configuration
- DDS Network Connection
- Verification Testing
- DSU Operations 4
- Table Of Contents
- Diagnostic Control Panel
- SDCP and Model 3611 DSU Faceplate
- Series DSU Status Indicators
- Menu Structure
- Status Branch
- device health and status
- expanded health and status
- DTE Lead Status Codes
- Identity Field Descriptions
- Backup Branch
- Test Branch
- Test Branch Menu Selections for the DSU
- Device Test
- Local Loopback
- DTE Loopback
- Digital Loopback
- Remote Digital Loopback
- Bilateral Loopback
- Digital Test
- Digital Test Results
- End-to-End Test
- End-to-End Test Results
- Bit Error Rate Test
- Bit Error Rate Test Results
- Configuration Branch
- Default Configuration Option Sets
- PList Options and Their Function
- changing the poll list
- network address
- async terminal
- Control Branch
- transmitter control
- displaying external leads
- Lead States
- Messages Branch
- MCMP Initialization Procedure
- Verification Procedure
- Option Sets
- Using the DCP to Set Configuration Options
- B. Configuration Worksheets
- DSU Configuration Options
- Diagnostic DSU Configuration Options
- Diagnostic DBM Configuration Options
- Diagnostic General Configuration Options
- DBM Configuration Options
- General Configuration Options
- CTS Interface Lead Control
- Backup Configuration Options
- TDM Setup (MUX Funct: TDM) Configuration Options
- MCMP Setup (MUX Funct: MCMP) Configuration Options
- Digital Bridge Setup (MUX Funct: CBrdg or EBrdg) Configuration Options
- TDM/MCMP Port (MUX Funct: TDM or MCMP) Configuration Options
- Digital Bridge Port (MUX Funct: CBrdg or EBrdg) Configuration Options
- Port Speed Configuration Options for DSU with TDM
- Port Speed Configuration Options for DSU with MCMP
- Port Speed Configuration Options for DBM with TDM or MCMP
- Channel-to-Port Assignment Configuration Options for MCMP
- LPDA-2 Configuration Options
- data service unit menu
- C-2 Command Progress Messages
- health and status
- C-5 Expanded Health and Status Messages
- C-6 Subnetwork Health and Status Messages
- C-7 Multipoint Backup Progress Messages
- C-8 Point-to-Point Dial Backup Progress Messages
- C-9 Point-to-Point Dial Backup Error Messages
- async terminal operation
- D-1 Password Access Menu Screen
- D-2 Top-Level Menu Screen
- D-3 Second-Level Menu Screen
- D-5 Control Function Menu Selection Screen
- D-6 External Leads Menu Selection Screen
- D-8 Async Terminal Menu Screen
- network management
- F-3 3600 Hubbing Device Pin Assignments
- Rear Connector Plate (3000-F1-021)
- F-6 EIA-232/V.24 Connector Pin Assignments
- F-7 Modular DSU 25-Pin V.35 Connector Pin Assignments
- F-8 NMS Adapter Cable Pin Assignments
- troubleshooting
- H-1 NMS Command Set
- I-2 A Options
- I-7 F Options
- I-8 G Options
- J-1 DSU Options
COMSPHERE 3600 Series
Table of contents
Related products
COMSPHERE 3800 SeriesComsphere 3500 SeriesCOMSPHERE 3550 SeriesCOMSPHERE 6800 SeriesCOMSPHERE 6700 SeriesCOMSPHERE 3920PLUS SeriesCompshere 3000 SeriesCOMSPHERE 3610COMSPHERE 3611COMSPHERE 3611Paradyne categories
Network Hardware
Modem
Network Router
Network Card
Adapter
Multiplexer
Extender
Software
Network Accessory
Cables and connectors
manualsdatabase
Your AI-powered manual search engine