Generating an RF Summary Report 493■ Floor■ Coverage Area3 Select the instance for which you want the report. For example, if thescope is Building, select the building.4 Select the time period for the report:■ 1 Hour■ 24 Hours■ 7 Days■ 30 Days5 To change the output directory for the report, click on the button next tooutput directory, navigate to the new directory, and click Select.6 To prevent 3WXM from replacing an existing report of the same type withthis new report, click next to Overwrite Existing Files to deselect thisoption.7 Click Generate.8 When the report is generated, click the report link to view it.The network usage report contains the following sections:■ Cumulative statistics for the scope of the report■ Usage statistics on individual WX switchesGenerating an RFSummary ReportThe RF summary report lists summary RF statistics.The data for this report comes from the monitoring service. The EnableRF trending option, located in the RF Monitor group box of theMonitoring Settings tab, must be enabled. (See “Changing MonitoringSettings” on page 552.)1 Select Reports > RF Summary from the toolbar in the main 3WXMwindow.The RF Summary Report dialog box appears.2 Select the scope type of the report from the Report Scope Type listbox:■ Mobility Domain■ Wireless Switch■ Site
