50 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACETable 9 lists the Rogue Detection objects. These objects controlconfiguration parameters for rogue detection.Site Objects The Sites section of the Organizer panel contains objects for the buildingswhere you want to deploy 3Com equipment. A site can contain one ormore buildings and each building can contain one or more floors. Eachfloor contains objects for wiring closets, coverage areas, MAP accesspoints, and third-party access points.Table 10 lists the objects in a site.Spanning TreePropertiesSame as Management Services in Domain Polices, butapplicable to this WX switch only.AAA Same as Management Services in Domain Polices, butapplicable to this WX switch only.802.1X Same as Management Services in Domain Polices, butapplicable to this WX switch only.ACLs Same as Management Services in Domain Polices, butapplicable to this WX switch only.Mobility Profiles Same as Management Services in Domain Polices, butapplicable to this WX switch only.IP Services Same as Management Services in Domain Polices, butapplicable to this WX switch only.Table 9 Rogue Detection ObjectsObject DescriptionRogue Detection Setting for countermeasures, which are packets that3Com radios send to prevent clients from using rogueaccess points detected during RF scanning.Known Addresses List of devices you want WX switches to ignore whenperforming rogue detection and issuing countermeasuresagainst the rogues the WX switches detect.Table 8 WX Switch Objects (continued)
