1-18Configuring PIM-SMPIM-SM Configuration Task ListComplete these tasks to configure PIM-SM:Task RemarksConfiguring PIM-SM RequiredConfiguring a static RP OptionalConfiguring a C-RP OptionalEnabling auto-RP OptionalConfiguring an RPConfiguring C-RP timers globally OptionalConfiguring a C-BSR OptionalConfiguring a PIM domain border OptionalConfiguring global C-BSR parameters OptionalConfiguring a BSRConfiguring C-BSR timers OptionalEnabling administrative scoping OptionalConfiguring an admin-scope zone boundary OptionalConfiguring Administrative ScopingConfiguring C-BSRs for each admin-scopezone and the global-scope zone OptionalConfiguring Multicast Source Registration OptionalDisabling SPT Switchover OptionalConfiguring PIM Common Features OptionalConfiguration PrerequisitesBefore configuring PIM-SM, complete the following task:z Configure any unicast routing protocol so that all devices in the domain are interoperable at thenetwork layer.Before configuring PIM-SM, prepare the following data:z The IP address of a static RP and an ACL rule defining the range of multicast groups to be servedby the static RPz C-RP priority and an ACL rule defining the range of multicast groups to be served by each C-RPz A legal C-RP address range and an ACL rule defining the range of multicast groups to be servedz C-RP-Adv intervalz C-RP timeoutz C-BSR priorityz Hash mask lengthz An ACL rule defining a legal BSR address range
