3Com S7906E Configuration Manual

Also see for S7902E: Product guide Datasheet Getting started guide Command reference guide

Contents

3Com S7906E Configuration Manual Manual pdf 1732 page image

2-2Configuring a QoS PolicyFigure 2-1 shows how to configure a QoS policy.Figure 2-1 QoS policy configuration procedureDefining a ClassTo define a class, you need to specify a name for it and then configure match criteria in class view.Follow these steps to define a class:To do… Use the command… RemarksEnter system view system-view —Create a class and enter classviewtraffic classifier tcl-name[ operator { and | or } ]RequiredBy default, the relationshipbetween match criteria is AND.Configure match criteria if-match match-criteria Requiredmatch-criteria: Match criterion. Table 2-1 shows the available criteria.Table 2-1 The keyword and argument combinations for the match-criteria argumentKeyword and argument combination Descriptionacl { access-list-number | name acl-name }Specifies to match an IPv4 ACL specified by itsnumber or name. The access-list-numberargument specifies an ACL by its number, whichranges from 2000 to 4999; the name acl-namekeyword-argument combination specifies anACL by its name.