1-37To do… Use the command… RemarksSpecify the secondaryHWTACACS authorizationserversecondary authorizationip-address [ port-number ]z It is recommended to specify only the primary HWTACACS authorization server if backup is notrequired.z If both the primary and secondary authorization servers are specified, the secondary one is usedwhen the primary one is not reachable.z The IP addresses of the primary and secondary authorization servers cannot be the same.Otherwise, the configuration fails.z You can remove an authorization server only when no active TCP connection for sendingauthorization packets is using it.Specifying the HWTACACS Accounting ServersFollow these steps to specify the HWTACACS accounting servers and perform related configurations:To do… Use the command… RemarksEnter system view system-view —Enter HWTACACS schemeviewhwtacacs schemehwtacacs-scheme-name —Specify the primaryHWTACACS accounting serverprimary accountingip-address [ port-number ]Specify the secondaryHWTACACS accounting serversecondary accountingip-address [ port-number ]RequiredConfigure at least one of thecommandsNo accounting server by defaultEnable the device to bufferstop-accounting requestsgetting no responsesstop-accounting-bufferenableOptionalEnabled by defaultSet the maximum number ofstop-accounting requesttransmission attemptsretry stop-accountingretry-timesOptional100 by default
