4-8To do… Use the command… RemarksEnterinterfaceviewinterface interface-typeinterface-numberEnterinterfaceview orport groupviewEnter portgroupviewport-group manual port-group-nameUse either commandSettings in interface view takeeffect on the current interface;settings in port group view takeeffect on all ports in the portgroup.Configure the inboundor outbound line rate forthe interface/port groupqos lr outbound circommitted-information-rate [ cbscommitted-burst-size ]Requiredz On SC, SA, and EA LPUs, thegranularity of line rate is 64kbps.z On SD and EB LPUs, thegranularity of line rate is 8kbps.Display line rateconfigurationinformation on theinterface/all interfacesdisplay qos lr interface[ interface-type interface-number ] Available in any viewConfiguration ExampleLimit the outbound line rate of GigabitEthernet 2/0/1 to 512 kbps.# Enter system view. system-view# Enter interface view.[Sysname] interface gigabitethernet 2/0/1# Limit the outbound line rate of GigabitEthernet 2/0/1 to 512 kbps.[Sysname-GigabitEthernet2/0/1] qos lr outbound cir 512Displaying and Maintaining Traffic Policing, GTS, and Line RateOn the S7900E series switches, you can configure traffic policing in policy-based approach. For relateddisplaying and maintaining commands, refer to Displaying and Maintaining QoS Policies.To do… Use the command… RemarksDisplay interface GTSconfiguration informationdisplay qos gts interface[ interface-typeinterface-number ]Available in any viewDisplay interface line rateconfiguration informationdisplay qos lr interface[ interface-typeinterface-number ]Available in any view
