1-26Use the display mld ssm-mapping group command to view information of the MLD multicast groupscreated based on the configured MLD SSM mappings.# Display the IPv6 multicast group information created based on the configured MLD SSM mappings onSwitch D.[SwitchD] display mld ssm-mapping groupTotal 1 MLD SSM-mapping Group(s).Interface group report informationVlan-interface400 (4001::2):Total 1 MLD SSM-mapping Group reportedGroup Address: FF3E::101Last Reporter: 4001::1Uptime: 00:02:04Expires: offUse the display pim ipv6 routing-table command to view the IPv6 PIM routing table information oneach switch.# Display the IPv6 PIM routing table information on Switch D.[SwitchD] display pim ipv6 routing-tableTotal 0 (*, G) entry; 2 (S, G) entry(1001::1, FF3E::101)Protocol: pim-ssm, Flag:UpTime: 00:13:25Upstream interface: Vlan-interface104Upstream neighbor: 1003::1RPF prime neighbor: 1003::1Downstream interface(s) information:Total number of downstreams: 11: Vlan-interface400Protocol: mld, UpTime: 00:13:25, Expires: -(3001::1, FF3E::101)Protocol: pim-ssm, Flag:UpTime: 00:13:25Upstream interface: Vlan-interface103Upstream neighbor: 3002::1RPF prime neighbor: 3002::1Downstream interface(s) information:Total number of downstreams: 11: Vlan-interface400Protocol: mld, UpTime: 00:13:25, Expires: -MLD Proxying Configuration ExampleNetwork requirementsz IPv6 PIM-DM is required to run on the core network. Host A and Host C in the stub network receiveVOD information destined to multicast group FF3E::101.
