2-8The path and filename prefix of a saved configuration file must be specified before you configure theautomatic saving period.Saving the Current Running Configuration ManuallyAutomatic saving of the current running configuration occupies system resources, and frequent savinggreatly affects system performance. Therefore, if the system configuration does not change frequently,you are recommended to disable the automatic saving of the current running configuration and save itmanually.If the modification to the configuration fails, or is complicated, you can save the current runningconfiguration manually before you modify it. Therefore, if it really fails, the device can revert to theconfiguration state before the modification.Follow the step below to save the current running configuration manually:To do… Use the command… RemarksSave the current runningconfiguration manually archive configuration RequiredAvailable in user viewThe path and filename prefix of a saved configuration file must be specified before you save the currentrunning configuration manually; otherwise, the operation fails.Setting Configuration RollbackFollow these steps to set configuration rollback:To do… Use the command… RemarksEnter system view system-view —Set configuration rollback configuration replace filefilename Required
