2-12Table 2-1 Description of common optionsOption Option name Corresponding command Command parameter3 Router Option gateway-list ip-address6 Domain Name Server Option dns-list ip-address15 Domain Name domain-name ascii44 NetBIOS over TCP/IP NameServer Option nbns-list ip-address46 NetBIOS over TCP/IP NodeType Option netbios-type hex66 TFTP server name tftp-server ascii67 Bootfile name bootfile-name ascii43 Vendor Specific Information — hexBe cautious when configuring self-defined DHCP options because such configuration may affect DHCPoperation.Enabling DHCPEnable DHCP before performing other configurations.Follow these steps to enable DHCP:To do… Use the command… RemarksEnter system view system-view —Enable DHCP dhcp enable RequiredDisabled by default.Enabling the DHCP Server on an InterfaceWith the DHCP server enabled on an interface, upon receiving a client’s request, the DHCP server willassign an IP address from its address pool to the DHCP client.Follow these steps to enable the DHCP server on an interface:To do… Use the command… RemarksEnter system view system-view —Enter interface view interface interface-type interface-number —Enable the DHCP server on aninterfacedhcp select server global-pool[ subaddress ]OptionalEnabled by default.
