1-60.00% packet lossround-trip min/avg/max = 1/2/4 msDynamic Domain Name Resolution Configuration ExampleNetwork requirementsAs shown in Figure 1-4, the IP address of the DNS server is 2.1.1.2/16 and the name suffix is com. Themapping between domain name host and IP address 3.1.1.1/16 is stored in the com domain.Dynamic domain name resolution and the domain name suffix are configured on the Switch that servesas a DNS client, and thus the Switch can use domain name host to access the host with the domainname host.com and the IP address 3.1.1.1/16.Figure 1-4 Network diagram for dynamic domain name resolutionConfiguration procedurez Before performing the following configuration, make sure that the Switch and the host areaccessible to each another via available routes, and the IP addresses of the interfaces areconfigured as shown Figure 1-4.z This configuration may vary with different DNS servers. The following configuration is performed ona Windows server 2000 PC.1) Configure the DNS server# Enter the DNS server configuration page.Select Start > Programs > Administrative Tools > DNS.# Create zone com.As shown in Figure 1-5, right click Forward Lookup Zones, select New zone, and then follow theinstructions to create a new zone named com.
