1-8To do… Use the command… RemarksConfigure the output rules ofsystem informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug { levelseverity | state state } * | log{ level severity | state state } * |trap { level severity | statestate } * ] *OptionalRefer to Default Output Rulesof System Information.Configure the format of the timestampinfo-center timestamp{ debugging | log | trap }{ boot | date | none }OptionalThe time stamp format for log,trap and debugging informationis date by default.Enabling the display of system information on the consoleAfter setting to output system information to the console, you need to enable the associated displayfunction to display the output information on the console.Follow these steps in user view to enable the display of system information on the console:To do… Use the command… RemarksEnable the monitoring ofsystem information on theconsoleterminal monitorOptionalEnabled on the console anddisabled on the monitorterminal by default.Enable the display ofdebugging information on theconsoleterminal debugging RequiredDisabled by defaultEnable the display of loginformation on the console terminal logging OptionalEnabled by defaultEnable the display of trapinformation on the console terminal trapping OptionalEnabled by defaultOutputting System Information to a Monitor TerminalSystem information can also be output to a monitor terminal, which is a user terminal that has loginconnections through the AUX and VTY user interface.Outputting system information to a monitor terminalTo do… Use the command… RemarksEnter system view system-view —Enable information center info-center enable OptionalEnabled by defaultName the channel with aspecified channel numberinfo-center channelchannel-number namechannel-nameOptionalRefer to Table 1-2 for defaultchannel names.
