|
3Com® VCX V7111 VoIP Gateway User Guide 1335 Configure the Profiles parameters according to your requirements. For detailedinformation on each parameter, see the description of the screen in which it is configuredas an individual parameter.6 From the Coder Group drop-down list, select the coder group you want to assign to thatProfile. You can select the gateways default coders (see Coders) or one of the codergroups you defined in the Coder Group Settings screen (see Coder Group Settings).7 Repeat Steps 2 to 6 for the second to fifth IP Profiles (optional).8 Click Submit to save your changes.9 To save the changes so they are available after a power fail, see Saving Configuration.Table 38 ini File IP Profile SettingsParameter DescriptionIPProfile_ID IPProfile_ =,,,*>,, ,,*>,, , ,, , , ,, For example:IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,1,0IPProfile_2 = name2,$$,$$,$$,$$,$$,$$,$$,$$,1,$$,$$,$$,$$,$$,$$,$$$$ = Not configured, the default value of the parameter is used.(*) = Common parameter used in both IP and Tel profiles.This parameter can appear up to 9 times (ID = 1 to 9).Configuring the Endpoint Phone NumbersFrom the Endpoint Phone Number Table screen you can enable and assign telephonenumbers, hunt groups (optional) and profiles to the VoIP gateway ports.To configure the Endpoint Phone Number table:1 Open the Endpoint Phone Number Table screen (Protocol Management menu >Endpoint Phone Numbers); the Endpoint Phone NumberTable screen is displayed.
|
