3Com® VCX V7111 VoIP Gateway User Guide 409To open the BootP/TFTP:3 From the Start menu on your computer, navigate to Programs and then click BootP.4 The first time that you run the BootP/TFTP, the program prompts you to set the userpreferences. See Setting the Preferences for information on setting the preferences.Loading the cmp File, Booting the DeviceOnce the application is running, and the preferences were set (see Setting the Preferences),for each unit that is to be supported, enter parameters into the tool to set up the networkconfiguration information and initialization file names. Each unit is identified by a MACaddress. For information on how to configure (add, delete and edit) units, see Configuringthe BootP Clients.To load the software and configuration files:1 Create a folder on your computer that contains all software and configuration files thatare needed as part of the TFTP process.2 Set the BootP and TFTP preferences (see Setting the Preferences).3 Add client configuration for the VoIP gateway that you want to initialize by the BootP, seeAdding Clients.4 Reset the VoIP gateway, either physically or remotely, causing the device to use BootPto access the network and configuration information.BootP/TFTP Application User InterfaceFigure 145 shows the main application screen for the BootP/TFTP utility.Figure 145 Main ScreenLog Window
