226 3Com® VCX V7111 VoIP Gateway User GuideFigure 90 End Process Screen11 Click the End Process button; the Quick Setup screen appears and the full Webapplication is reactivated.Auxiliary FilesThe Auxiliary Files screen enables you to load to the gateway the following files: CallProgress Tones, coefficient, Prerecorded Tones (PRT) and User Information. The VoicePrompts file is currently not applicable to the V7111. For detailed information on these files,see Chapter 6: ini File Configuration of the V7111. For information on deleting these filesfrom the V7111, see Device Information. Table 77 presents a brief description of eachauxiliary file.Table 77 Auxiliary Files DescriptionsFile Type DescriptionFXS Coefficient This file contains the telephony interface configuration information for the VoIPgateway. This information includes telephony interface characteristics, such as DC andAC impedance, feeding current and ringing voltage. This file is specific to the type oftelephony interface that the VoIP gateway supports. In most cases you have to loadthis type of file.Use the parameter CountryCoefficients (described in Table 49) to configurethe FXO coefficients.Call ProgressTonesThis is a region-specific, telephone exchange-dependent file that contains the CallProgress Tones levels and frequencies that the VoIP gateway uses. The default CPTfile is: U.S.A.Prerecorded Tones The dat PRT file enhances the gateways capabilities of playing a wide range oftelephone exchange tones that cannot be defined in the Call Progress Tones file.User Information The User Information file maps PBX extensions to IP numbers. This file can be used torepresent PBX extensions as IP phones in the global IP world.
