3Com® VCX V7111 VoIP Gateway User Guide 4334 To add the prerecorded tone files (you created in Step 1) to the Prerecorded Tonesscreen follow one of these procedures: Select the files and drag them to the Prerecorded Tones screen. Click the Add File(s) button; the Select Files screen opens. Select the requiredPrerecorded Tone files and click the Add>> button. Close the Select Files screen.5 For each raw data file, define a Tone Type, a Coder and a Default Duration bycompleting the following steps: Double-click or right-click the required file; the File Data window (shown in Figure154) appears. From the Type drop-down list, select the tone type this raw data file is associatedwith. From the Coder drop-down list, select the coder that corresponds to the coder thisraw data file was originally recorded with. In the Description field, enter additional identifying information (optional). In the Default field, enter the default duration this raw data file is repeatedly played. Close the File Data window (press the Esc key to cancel your changes); you arereturned to the Prerecorded Tones File(s) screen.Figure 154 File Data Window6 In the Output field, specify the output directory in which the PRT file is generatedfollowed by the name of the PRT file (the default name is prerecordedtones.dat).Alternatively, use the Browse button to select a different output file. Navigate to thedesired file and select it; the selected file name and its path appear in the Output field.7 Click the Make File(s) button; the Progress bar at the bottom of the window is activated.The dat file is generated and placed in the directory specified in the Output field. Amessage box informing you that the operation was successful indicates that the processis completed.Call Progress Tones WizardThis section describes the Call Progress Tones Wizard (CPTWizard), an applicationdesigned to facilitate the provisioning of a V7111/FXO gateway by recording and analyzingCall Progress Tones generated by any PBX or telephone network.
