3Com® VCX V7111 VoIP Gateway User Guide 145Figure 52 RADIUS Parameters Screen2 Configure the RADIUS accounting parameters according to Table 46.3 Click Submit to save your changes.4 To save the changes so they are available after a power fail, see Saving Configuration.Table 46 RADIUS ParametersParameter DescriptionEnable RADIUSEnableRADIUSEnables or disables the RADIUS application.Valid options include:Disables [0] = disables RADIUS application (default)Enable [1] = enables RADIUS applicationRADIUS Accounting ServerIP Address[RADIUSAccServerIP]IP address of the RADIUS accounting server.RADIUS Accounting Port[RADIUSAccPort]Port of the RADIUS accounting server.The default value is 1646.RADIUS Accounting Type[RADIUSAccountingType]Determines when the RADIUS accounting messages are sent to the RADIUSaccounting server.Valid options include:At Call Release [0] = At the release of the call only (default).At Connect and Release [1] = At the connect and release of the call.At Setup and Release [2] = At the setup and release of the call.AAA Indications[AAAIndications]Determines which Authentication, Authorization and Accounting (AAA) indicationsto use.Valid options include:None [0] = No indications (default)Accounting Only [3] = Only accounting indications are used.Configuring the FXO ParametersUse this screen to configure the gateways specific FXO parameters.To configure the FXO parameters:1 Open the FXO Settings screen (Protocol Management menu > FXO Settings > FXOSettings option); the FXO Settings screen is displayed.
