166 3Com® VCX V7111 VoIP Gateway User GuideFigure 58 NFS ini File Example[ NFSServers ]FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,NFSServers_NfsVersion, NFSServers_AuthType, NFSServers_UID, NFSServers_GID,NFSServers_VlanType;NFSServers 1 = 101.1.13, /audio1, 3, 1, 0, 1, 1;[ \NFSServers ]Configuring the IP Routing TableThe IP routing table is used by the gateway to determine IP routing rules. It can be used, forexample, to define static routing rules for the OAM and Control networks since a defaultgateway is not supported for these networks (see Multiple IPs). Before sending an IP packet,the gateway searches this table for an entry that matches the requested destination host /network. If such entry is found, the gateway sends the packet to the indicated router. If noexplicit entry is found, the packet is sent to the default gateway (configured in NetworkSettings > IP Settings screen). Up to 50 routing entries are available.To configure the IP Routing table:1 Open the IP Routing Table screen (Advanced Configuration menu > Network Settings >Routing Table option); the IP Routing Table screen is displayed.Figure 59 IP Routing Table Screen2 Use the Add a new table entry pane to add a new routing rule. Each field in the IP routingtable is described in Table 53.3 Click the button Add New Entry; the new routing rule is added to the IP routing table.
