460 3Com® VCX V7111 VoIP Gateway User Guideconformity indicating that Industry Canada technical specifications were met. It does notimply that Industry Canada approved the equipment.FXO Ports: The Ringer Equivalence Number (REN) for this terminal is 0.5. The RENassigned to each terminal equipment provides an indication of the maximum number ofterminals allowed to be connected to a telephone interface. The termination on an interfacemay consist of any combination of devices subject only to the requirement that the sum ofRinger Equivalence Number of all devices do not exceed five.V7111 FXO NoticeThe MP-11x FXO Output Tones and DTMF level should not exceed -9 dBm (3Com setting#23) in order to comply with FCC 68, TIA/EIA/IS-968 and TBR-21.The maximum allowed gain between any 2 ports connected to the PSTN should be set to 0dB in order to comply with FCC 68, TIA/EIA/IS-968 Signal power limitation.Network Compatibility of FXO PortsThe products support the Telecom networks in EU that comply with TBR21.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. Consult the dealer or an experienced radio/TV technician for help.ACTA Customer information This equipment, the VoIP Analog Gateway, models MP-118, MP-114 and MP-112complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. Onthe bottom of the unit of this equipment is a label that contains among other information,a product identifier in the format US:AC1IT00BMP11X3AC. If requested, this numbermust be provided to the telephone company.
