350 3Com® VCX V7111 VoIP Gateway User GuideThe number described above is known as the Priority and represents both the Facility andSeverity as described below. The Priority number consists of one, two, or three decimalintegers.For example:<37> Oct 11 16:00:15 mymachine su: 'su root' failed for lonvick on/dev/pts/8Syslog ServersUsers can use the provided 3Com Syslog server (ACSyslog08.exe) or any other third-partySyslog servers.Examples of Syslog servers available as shareware on the Internet: Kiwi Enterprises: www.kiwisyslog.com/ The US CMS Server: uscms.fnal.gov/hanlon/uscms_server/ TriAction Software: www.triaction.nl/Products/SyslogDaemon.asp Netal SL4NT 2.1 Syslog Daemon: www.netal.comA typical Syslog server application enables filtering of the messages according to priority, IPsender address, time, date, etc.OperationThe Syslog client, embedded in the V7111 gateway, sends error reports/events generated bythe V7111 unit application to a Syslog server using IP/UDP protocol.To activate the Syslog client on the V7111 gateway:1 Set the parameter EnableSyslog to 1 (see Table 65).2 Use the parameter SyslogServerIP to define the IP address of the Syslog server you use(see Table 65).3 Use the parameter 'SyslogServerPort' to define the UDP port number of the Syslogserver (refer to Table 65).4 To determine the Syslog logging level use the parameter GWDebugLevel (see Table 23).5 To enable the gateway to send log messages that report certain types of Web actionsaccording to a pre-defined filter use the parameter ActivityListToLog (described in Table65).
