3Com® VCX V7111 VoIP Gateway User Guide 45CHAPTER 4: G ETTING S TARTEDThe V7111 gateway is supplied with default networking parameters (show in Table 14) andwith an application software already resident in its flash memory (with factory defaultparameters).Before you begin configuring the gateway, change its default IP address to correspond withyour network environment (see Assigning the V7111 IP Address) and learn about theconfiguration methods available on the V7111 (see Configuration Concepts).For information on quickly setting up the V7111 with basic parameters using a standard Webbrowser, see Assigning an IP Address Using the Voice Menu Guidance.Table 14 V7111 Default Networking ParametersFXS or FXO Default ValueFXS 10.1.10.10FXO 10.1.10.11FXS / FXO 10.1.10.10V7111 default subnet mask is 255.255.0.0, default gateway IP address is 0.0.0.0Configuration ConceptsUsers can use the V7111 gateway in a wide variety of applications, enabled by itsparameters and configuration files (for example, Call Progress Tones (CPT)). Theparameters can be configured and configuration files can be loaded using: A standard Web Browser (described and explained in Chapter 5: Web Management). A configuration file referred to as the ini file. For information on how to use the ini file, seeChapter 6: ini File Configuration of the V7111. An SNMP browser software (see Chapter 14: SNV7111-Based Management.) Element Management System (EMS) (see SNMP NAT Traversal and to the EMS UsersManual or EMS Product Description).To upgrade the V7111 (load new software or configuration files onto the gateway) use theSoftware Upgrade wizard, available through the Web Interface (see Software UpgradeWizard), or alternatively use the BootP/TFTP configuration utility (see Upgrading the V7111Gateway).For information on the configuration files, see Chapter 6: ini File Configuration of the V7111.
