312 3Com® VCX V7111 VoIP Gateway User GuideReplacing the Background Image FileThe background image file is duplicated across the width of the screen. The number of timesthe image is duplicated depends on the width of the background image and screenresolution. When choosing your background image, keep this in mind.Use a gif, jpg or jpeg file for the background image. It is important that the image filehas a fixed height of 59 pixels. The size of the image files (logo and background) islimited each to 64 kbytes.To replace the background image using the Web:1 Access the V7111 Embedded Web Server (see Accessing the Embedded Web Server).2 In the URL field, append the suffix AdminPage (note that its case-sensitive) to the IPaddress, for example, http://10.1.229.17/AdminPage.3 Click the Image Load to Device, the Image load screen is displayed (shown in Figure116).4 Click the Browse button in the Send Background Image File from your computer togateway box. Navigate to the folder that contains the background image file you want toload.5 Click the Send File button; the file is sent to the device. When loading is complete, thescreen is automatically refreshed and the new background image is displayed.6 To save the image to flash memory so it is available after a power fail, see SavingConfiguration.The new background appears on all Web Interface screens.If you encounter any problem during the loading of the files, or you want to restorethe default images, click the Restore Default Images button.When replacing both the background image and the logo image, first load the logoimage followed by the background image.To replace the background image using the ini file:1 Place your background image file in the same folder as where the devices ini file islocated (that is, the same location defined in the BootP/TFTP configuration utility). Fordetailed information on the BootP/TFTP, see Appendix C: BootP/TFTP ConfigurationUtility.2 Add/modify the ini file parameters in Table 90 according to the procedure described inModifying an ini File.Note that loading the devices ini file using the Configuration File screen in the Web Interfacedoes not load the logo image file as well.
