100 Program features List of the tasks and the relevant drive parametersDepending on the selection made in the Application task (parameter 9902 APPLICMACRO), the Start-up assistant decides which consequent tasks it suggests.Name Description Set parametersLanguage select Selecting the language 9901Motor set-up Setting the motor data 9905…9909Application Selecting the application macro 9902, parametersassociated to the macroOption modules Activating the option modules Group 35: Motor tempmeas, Group 52: Panelcomm, 9802Speed control EXT1 Selecting the source for the speed (outputfrequency) reference1103(If AI1 is used: Setting analog input AI1limits, scale, inversion)(1301…1303, 3001)Setting the reference limits 1104, 1105Setting the frequency limits 2007, 2008Setting the acceleration and decelerationtimes2202, 2203Speed control EXT2 Selecting the source for the speed (outputfrequency) reference1106(If AI1 is used: Setting analog input AI1limits, scale, inversion)(1301…1303, 3001)Setting the reference limits 1107, 1108PID control Selecting the source for the processreference1106(If AI1 is used: Setting analog input AI1limits, scale, inversion)(1301…1303, 3001)Setting the reference limits 1107, 1108Setting the speed (reference) limits 2007, 2008Setting the source and limits for theprocess actual value4016, 4018, 4019Start/Stop control Selecting the source for start and stopsignals of the two external controllocations, EXT1 and EXT21001, 1002Selecting between EXT1 and EXT2 1002Defining the direction control 1003Defining the start and stop modes 2101…2103Selecting the use of Run Enable signal 1601Protections Setting the current limits 2003Output signals Selecting the signals indicated throughrelay output RO Group 14: Relay outputsSelecting the signals indicated throughanalog output AOSetting the minimum, maximum, scalingand inversionGroup 15: Analogueoutputs
