328 Fieldbus control*Object instance applies for US regional variant only.Note: For Present Value Access Types, R = Read-only, W = Writeable,C = Commandable. Commandable values support priority arrays & relinquishdefaults. Analog input object instance summaryThe following table summarizes the Analog input objects supported:Note: For Present Value Access Types, R = Read-only, W = Writeable,C = Commandable. Commandable values support priority arrays & relinquishdefaults. Analog output object instance summaryThe following table summarizes the Analog output objects supported:Note: For Present Value Access Types, R = Read-only, W = Writeable,C = Commandable. Commandable values support priority arrays & relinquishdefaults.BV22* HEATING CMD Command to automaticallyassert Motor Heating DCcurrent injection, when driveis stopped (drive must beconfigured for BACnetcontrol).In this mode, “DISABLE”turns off the ongoing MotorHeating operationimmediately (after the drivehas received the command).ENABLE/DISABLE CBV23* HEATING STS Indicates the status of MotorHeating DC current injection(drive must be configuredfor BACnet control).“ON” means there is actualheating current flowing inthe motor circuit.ON/OFF RInstanceID Object Name Description Units Present ValueAccess TypeAI0 ANALOG INPUT1Indicates the input level of AnalogInput 1.Percent RAI1 ANALOG INPUT2Indicates the input level of AnalogInput 2.Percent RInstanceID Object Name Description Units Present ValueAccess TypeAO0 AO 1COMMANDControls Analog Output 1 (drive mustbe configured for BACnet control).Percent CInstanceID Object Name Description Active/InactiveText Present ValueAccess Type
