Drive configuration601 FBA DATA OUT 1This parameter represents data word 1 received by the drive overthe CANopen network. The content is defined by a decimalnumber in the range of 0 to 9999 as follows:Note: The FCAN-01 configuration parameters are 16-bitparameters. If the mapped parameter is a 32-bit parameter, itautomatically reserves two consecutive parameters. For example,mapping of a 32-bit parameter to Par. no. 1 also reserves Par.no. 2.Note: In ACS350 and ACS355, Rx PDO1 word 1 and Rx PDO6word 1 are fixed and always mapped to object 6040h Controlword. The first configuration parameters have effect on the 2ndwords of these PDOs in ACS350 and ACS355.The parameter area is allocated as follows:Parameter number with format xxyy, where xx is the parametergroup number (1 to 99) and yy is the parameter number indexwithin that group (01 to 99).0 Not used1...16 Drive virtual address. See the table on page 61.101...9999 Drive parameter 01.01...99.99
