7.6 Special toolsGeneralAll service instructions contain lists of tools required to perform the specifiedactivity. The required tools are a sum of standard tools, defined in the sectionStandard toolkit on page 268, and of special tools, listed directly in the instructionsand also gathered in this section.Special toolsThe following table specifies the special tools required during service procedures.The tools are also specified directly in concerned procedures for repair.Robot variantArt.no.DescriptionIRB 360 - 1/1130, IRB 360 - 3/1130,IRB 360 - 1/800, IRB 360 - 1/16003HAC4184-1Press tool for bearing(Drifter for mounting bearing rings.)IRB 360 - 1/1130, IRB 360 - 3/1130,IRB 360 - 1/800, IRB 360 - 1/16003HAC4182-1Press tool(Dolly for joint socket when insertingnew bearing rings.)All variants.3HAC6194-1Pliers for parallel arms--Heat gun(Required if the moveable plate isstainless, see Removal on page 196.)Product manual - IRB 360 2693HAC030005-001 Revision: U© Copyright 2008-2018 ABB. All rights reserved.7 Reference information7.6 Special tools
