Menu Trees61181041L3-5A 103Insert Cell Test ScreenThe Insert Cell Test Screen (see Figure 54) is used to perform cell insertion testing. The InsertCell Test provides a means to insert a cell with a predefined format on any PVC created andenabled. Enter the endpoint number to insert a cell, and press E NTER to display the results ofthe test.Figure 54. Insert Cell Test ScreenThe Insert Cell Test Screen options are shown in Table 62.Table 62. Insert Cell Test Screen FieldsField DescriptionINDEX This field displays the index number assigned to the VC/VP.STATUS This field displays the status of the VC/VP as Enabled or Disabled.TYPE This field displays the type as either PVC or PVP.SRV-CL This field displays the Service Class assigned to the PVC (defined bythe traffic descriptor).Endpoint 1 (Top Level)SH/SL/PO This field displays the shelf/slot/port location of the VC/VPEndpoint 1.VPI This field displays the current VPI value of the VC/VP Endpoint 1.VCI This field displays the current VCI value of the VC/VP Endpoint 1.Shelf: 1 Slot: B Total Access System MM/DD/YY HH:MMONLINEINSERT CELL TEST SCREENVC/VP Name: _InbandPVCENDPOINT 1 <-> ENDPOINT 2INDEX STATUS TYPE SH/SL/PO VPI VCI <-> SH/SL/PO VPI VCI SRV-CL1 ENABLED PVC MGMT PORT 0 32 <-> DS3 PORT 0 33 nrtVBR--------------------ENDPOINT1--------------------Ingress Rx : 0 Ingress Tx : 0Egress Rx : 0 Egress Tx : 0--------------------ENDPOINT2--------------------Ingress Rx : 0 Ingress Tx : 0Egress Rx : 0 Egress Tx : 0Enter Endpoint Number to Insert Cell, R - reset statistics
