Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice74 61181041L3-5ATable 38. VC/VP Provisioning - Create PVC/PVP Menu OptionsOption Description Function1 Fwd Traffic Descr. (1->2) Enter the index number or an alphanumeric string of up toten characters corresponding to the appropriate TrafficDescriptor for this endpoint. A list of available trafficdescriptors can be viewed by pressing ?.2 Bkwd Traffic Descr. (2->1) Enter the index number or an alphanumeric string of up toten characters corresponding to the appropriate TrafficDescriptor for this endpoint. A list of available trafficdescriptors can be viewed by pressing ?.N/A EndPoint1 In This field displays input Cells Per Second (CPS) data forEndpoint 1.N/A EndPoint1 Out This field displays output CPS data for Endpoint 1.N/A EndPoint2 In This field displays input CPS data for Endpoint 2.N/A EndPoint2 Out This field displays output CPS data for Endpoint 2.3 Sh/Sl/Po,DS3,MGMT This option refers to Endpoint 1 and requires the PVC End-point in the syntax of “Shelf/Slot/Port” or enter “DS3” or“MGMT”.If an endpoint is set to the Management port, an additionaloption (AAL Type) is available.4 VPI This option sets the VPI for Endpoint 1 and requires anumeric entry (0 to 255 when operating as a UNI or 0 to4095 when operating as an NNI).5 VCI This option sets the VCI for Endpoint 1 and requires anumeric entry (0 to 511 when operating as a UNI or 0 to65535 when operating as an NNI).6 AAL Type This option is used to set the AAL Type the MGMT Port atEndpoint 1 accepts (AAL0 or AAL5).7 AAL Encap Type This field is used to select the AAL Encapsulation type thatis implemented for the MGMT Port at Endpoint 1. Theoptions are as follows:• llcEncapsulation• vcMRoutedProt• encaps_other• encaps_unknown8 Rx SDU Size This option is used to set the Receive SDU size to a valuefrom 1 to 65536 for Endpoint 1.9 Tx SDU Size This option is used to set the Transmit SDU size to a valuefrom 1 to 65536 for Endpoint 1.10 Sh/Sl/Po,DS3,MGMT This option refers to Endpoint 2 and requires the PVC End-point in the form of “Slot/Port” or “DS3” or “MGMT”.
