Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice82 61181041L3-5AMDE Link Configuration MenuThe MDE Link Configuration menu (see Figure 41) is used to display the MDE configurationstatus. This is a dynamic menu that displays available options based upon input. Shelf 1 isthe Primary Shelf and shelves 2 through 6 are Expansion shelves. Only one shelf can beadded or removed at a time, and only in numerical order. For instance, Shelf 4 must bepresent before Shelf 5 can be added. All six options to add or remove a shelf are not displayedat the same time.Figure 41. MDE Link Configuration MenuThe MDE Link Configuration menu options are shown in Table 45.Table 45. MDE Link Configuration Menu OptionsOption Description Function1 Shelf 1 This field displays Shelf 1 (the Primary Shelf) as either ShelfPresent or Shelf Removed.2 Shelf 2 This field displays Shelf 2 as either Shelf Present or ShelfRemoved.3 Shelf 3 This field displays Shelf 3 as either Shelf Present or ShelfRemoved.4 Shelf 4 This field displays Shelf 4 as either Shelf Present or ShelfRemoved.5 Shelf 5 This field displays Shelf 5 as either Shelf Present or ShelfRemoved.6 Shelf 6 This field displays Shelf 6 as either Shelf Present or ShelfRemoved.Shelf: 1 Slot: B Total Access System MM/DD/YY HH:MMONLINEMDE Link ConfigurationShelf 1 : SHELF PRESENTShelf 2 : SHELF PRESENTShelf 3 : SHELF PRESENTShelf 4 : SHELF PRESENT5. Shelf 5 : SHELF PRESENT6. Shelf 6 : SHELF REMOVEDShelf 1 Link Status : LINK UPShelf 2 Link Status : LINK UPShelf 3 Link Status : LINK UPShelf 4 Link Status : LINK UPShelf 5 Link Status : LINK UPShelf 6 Link Status : LINK DOWNSelection:
