Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice70 61181041L3-5AThe VC/VP Provisioning screen hot keys are shown in Table 33.VPI This field displays the current VPI value of the VC/VP Endpoint 2.VCI This field displays the current VCI value of the VC/VP Endpoint 2.Table 36. VC/VP Provisioning Screen Hot KeysHot Key DescriptionC This hot key is used to create a new PVC . Typing C displays the “VC/VP Provision-ing - Create PVC/PVP Menu” on page 73.D This hot key is used to disable one PVC at a time. Typing D displays the EnterIndex of VC/VP To Disable prompt.E This hot key is used to enable one PVC at a time. Typing E displays the EnterIndex of VC/VP To Enable prompt. A PVC will not pass data unless it has beenenabled from this menu.ENTER I NDEX Enter the Index number for a corresponding PVC to display the “Detailed PVCInformation Screen” on page 71, which displays the details of that PVC.G This hot key is used to display a specific PVC page of the Created VC/VP List.L This hot key is used to display the Enter Index of VC/VP To Toggle Cell Loopbackfield.M This hot key is used to display more hot keys at the bottom of the menu.N This hot key is used to display the next page of PVCs in the Created VC/VP List.P This hot key is used to display the previous page of PVCs in the Created VC/VPList.R This hot key is used to remove a PVC. Typing R displays the Enter Index of VC/VPTo Remove prompt.S This hot key is used to display the “Search Through VC/VP List Menu” on page 77to search existing PVCs by traffic descriptor or assigned port.V This hot key is used to display the names and status of each PVC in the CreatedVC/VP List.Table 35. VC/VP Provisioning Screen Fields (Continued)Field Description
