Menu Trees61181041L3-5A 73VC/VP Provisioning - Create PVC/PVP MenuThe VC/VP Provisioning - Create PVC/PVP menu (see Figure 36) is used to create a PVC or aPVP, which are virtual connections of two endpoints.Figure 36. VC/VP Provisioning - Create PVC/PVP MenuTo provision a PVC, complete the following steps in order:1. Logon to the Total Access system via the PCU.2. Select Common A or Common B, depending on which PSM is to be provisioned, and pressE NTER.3. Select Provisioning, and press E NTER.4. Select VC/VP Provisioning, and press E NTER.5. Press C to display the VC/VP Provisioning - Create PVC/PVP menu.6. Assign a traffic descriptor to each endpoint of the PVC by selecting the optionscorresponding to Forward Traffic Descriptor and Backward Traffic Descriptor, and thenenter the name or index of the appropriate traffic descriptor. For a list of available trafficdescriptors, type ? (If the ? menu is used, enter A (assign) prior to the traffic descriptorselection.)7. Enter the VPI/VCI information for each endpoint using the available options and thenpress C to create the PVC.8. Once the PVC is created, a list of PVCs is displayed. Before a PVC can be used, it must beenabled. Press E followed by the number of the PVC to be enabled, and press E NTER toenable the PVC. The current screen updates to show the newly created PVC as Enabled.The VC/VP Provisioning - Create PVC/PVP menu options are shown in Table 38.Shelf: 1 Slot: B Total Access System MM/DD/YY HH:MMONLINEVC/VP PROVISIONINGTYPE: PVC NAME:1. Fwd Traffic Descr. (1->2) : 0:2. Bkwd Traffic Descr. (2->1) : 0:EndPoint1 In: 77283 CPS EndPoint2 In: 103956 CPSOut: 77283 CPS Out: 103956 CPS3. Sh/Sl/Po,DS3,MGMT : MGMT PORT 10. Sh/Sl/Po,DS3,MGMT : DS3 PORT4. VPI : 0 11. VPI : 05. VCI : 32 12. VCI : 326. AAL TYPE : AAL5 13. AAL TYPE : AAL07. AAL Encap Type : vcMRoutedProt8. Rx SDU Size : 15089. Tx SDU Size : 1508P-Set Path PVC/PVP, C-Create PVC/PVP, N-Set Name, Selection
