Menu Trees61181041L3-5A 59ATM Provisioning Screen - DS3 Port MenuThe ATM Provisioning Screen - DS3 Port menu (see Figure 30) is used to provision DS3settings.Figure 30. ATM Provisioning Screen - DS3 Port MenuThe ATM Provisioning Screen - DS3 Port menu options are shown in Table 30.Table 30. ATM Provisioning Screen - DS3 Port Menu OptionsOption Description Function1 Port ID This option is used to enter the Port ID string, which can beup to 40 alphanumeric characters in length.2 Service State This option is used to provision the service state of the DS3port. The following service states are available:• In Service: In this state, the DS3-PSM passes data;alarms are generated for error conditions.• Out of Service-Maintenance: In this state, the DS3 Portdoes pass data, but alarms are suppressed.• Out of Service-Unassigned: In this state, the DS3 Port isdisabled.The default state is Out of Service-Maintenance.3 Port Type This option is used to set the Port Type to one of thefollowing options:• UNI (User-to-Network Interface)• NNI (Network-to-Network Interface)Shelf: 1 Slot: B Total Access System MM/DD/YY HH:MMONLINEATM PROVISIONING SCREENDS3 PORT1. Port ID : DS3 PORT2. Service State : IN SERVICE3. Port Type : UNI4. Scrambler : ENABLE5. Idle Cell Type : ITU (INVALID CELL)6. Maximum VCCs : 40797. Maximum VPCs : 2568. Maximum VPI Bits : 8 Current: 89. Maximum VCI Bits : 9 Current: 910. Physical Address : 00-0000:00000000000000000000-000000000000.0011. Neighbor Name :12. Neighbor IP Address : 0.0.0.013. PNNI port options14. Restore Factory DefaultsI-ILMI, SELECTION'?' - System Help Screen
